How to Find Camera IP Address and Keep It Protected

Whether you’re setting up a new CCTV system or trying to troubleshoot a connection issue, knowing how to find camera IP address is essential. It’s the key to accessing live feeds, adjusting settings, and securing your network.

In this guide, you’ll learn six straightforward ways to locate your camera’s IP address, plus how to spot unsecured cameras, configure your setup properly, and keep your system safe from prying eyes.

6 Ways to Find Your Security Camera’s IP Address

If you’re wondering, how to find the IP address of my camera, the path can vary depending on the brand and model. Here are 6 reliable methods you can try, from the obvious to the slightly nerdy:

1. Check the camera’s companion app or software

The easiest way on how to find IP address of camera is by using the manufacturer’s app or software, if they offer one. Most modern IP cameras now come with smartphone apps that you download and install during setup. These apps allow you to adjust settings, watch live feeds, and receive remote alerts.

For example, if you’re using eufy cameras, you can quickly locate the IP address via the eufy Security app:

1. Open the app and tap the camera (or HomeBasehub) you need.
2. Go to Settings › General › About Device. The IP address for that unit is listed alongside its MAC and firmware version.
3. Note it down or copy-and-paste it into your browser to test the connection.

2. Look through your router’s connected devices list

Your Wi-Fi router serves as the central hub for your network, assigning IP addresses to all connected devices (including your camera) through protocols like DHCP (Dynamic Host Configuration Protocol) and maintaining a comprehensive record of these assignments.

To access your camera’s IP address through your router:

1. Open a browser on your computer and type in your router’s IP (common ones are 192.168.0.1 or 192.168.1.1) to access the admin page.
2. Log in using your router credentials, often found on a sticker on the back of the device.
3. Look for a section called Connected Devices, Client List, or Attached Devices to view all devices currently connected to the network.
4. Find your camera in the list—look for “eufyCam” or the MAC address shown on your camera’s sticker. The assigned IP address will be shown next to it.

Once you’ve found it, make a note of the IP address. If your router allows it, set up a DHCP reservation so the IP doesn’t change every time you restart the system.

3. Use network scanning tools

If your router interface is confusing, another easy way on how to find CCTV camera IP address is to use a network scanning tool.

Readily available options include:

• Fing(Android, iOS, Windows, macOS) lists every device, its IP, brand name and first-seen date in seconds.
• Angry IP Scanner offers a one-click sweep across Windows, macOS and Linux with exportable results.
• Nmap is a more advanced option. A simple command like nmap 192.168.0.0/24 scans your whole network, and adding flags like -p 80,443,554 --script=http-title can highlight cameras running web interfaces or RTSP.

To use the scanner, just open the app or program and start a scan of your local network.

Once the scan completes, look through the list for devices labelled “eufyCam”, “security camera” or something similar. If it’s not labelled, match the MAC address from your camera’s sticker.

4. Check the camera’s physical label

Flip the camera over or check the box. Manufacturers print the serial number and MAC address—and sometimes a default IP—on a sticker.

You can match that MAC address to the one listed in your router or network scan to confirm the IP.

5. Access the camera’s web interface

Many modern IP cameras come with a built-in web interface that you can access directly through your browser. This page usually lets you view live feeds, adjust settings, and check basic network information.

For example, you can access the eufy camera’s web portal at [https://mysecurity.eufylife.com/#/login]. You’ll typically find the URL in the camera’s user manual or on the manufacturer’s support page.

Here’s how to use it:

1. Open the web page in your browser.
2. Log in using the same account details you set up for the app, or use the default admin/password if you haven’t changed it.
3. Navigate to the Network Settings or LAN section (it might be worded slightly differently), where you can view or change the IP address and check which ports are in use.

6. Use command prompt or Terminal

For users comfortable with command-line tools, both Windows command prompt and macOS terminal offer direct access to network data, enabling the discovery of connected devices—including your IP camera—without additional software.

On Windows:

1. Press Win + R, type cmd, and hit Enter.
2. Ping your network’s broadcast address (e.g. ping 192.168.0.255).
3. Runarp -a to list all connected devices and their IP/MAC pairs.
4. Cross-reference the MAC address printed on your camera’s label to locate its assigned IP address.

On Mac or Linux:

1. Navigate to Applications › Utilities › Terminalto open the command-line interface.
2. Type arp -a or ip neighto see all connected devices.
3. Find your camera by matching its MAC address.

List of Unsecured IP Cameras

Many IP cameras, especially older or budget models, still ship with weak default credentials or have known, un-patched vulnerabilities. When you leave them exposed on the open internet, they become easy targets for automated scans and opportunistic hackers.

Below is a snapshot of camera models that have been repeatedly flagged for vulnerabilities:

If the table above makes you uneasy, here are two solid eufy cameras that approach security differently: unique default passwords, on-device AI, and no mandatory cloud.

The eufy SoloCam S340 Wireless Outdoor Security Camera pairs a 3K wide-angle lens with a 2K telephoto, giving you crisp detail up to 15 m away and 8× hybrid zoom without grainy blow-ups.

A 360° pan-and-tilt mount pairs with smart motion detection to wipe out blind spots, while the adjustable solar panel trickle-charges the battery, so you can forget about ladders and charging cables.

Footage lives on the camera’s 8GB eMMC, and it runs through on-device AI for people, vehicle, and pet detection, meaning you stay subscription-free, and your clips stay private.

Need full-property coverage? The eufyCam S330 shoots in true 4K, each camera sporting its own mini solar panel for “forever power.” Video stores locally on HomeBase 3—16GB built-in and expandable to 16TB with a standard hard drive—so marathon recording doesn’t cost a penny.

The hub’s BionicMind™ AI spots faces, pets, vehicles, and learns over time to reduce false alerts, all processed in-house for extra privacy. Add a 135° field of view, colour night vision, and two-way audio, and you get pro-level coverage without cloud lock-in.

Both eufy models ship with randomised admin passwords, TLS-encrypted app links, and frequent firmware pushes via the eufy Security app, giving you that peace of mind you’re looking for.

How to Configure IP Cameras to Network?

Getting an IP camera online isn’t complicated, but doing it the right way means fewer headaches later on. Below, we’ll walk you through the simple steps for both a wired PoE setup and a more modern wireless setup using a smartphone app:

For a wired PoE setup:

1. Start with a quick check: Before you connect anything, note down the camera’s default IP address (if it has one), MAC address, and factory login details. These are usually printed on a sticker on the camera or in the manual.
2. Plug in and find the camera on your network: Connect the camera to your router or PoE switch using an Ethernet cable. Once it powers up, it should appear on your network. Check your router’s Connected Devices page or use a network scanner app (like Fing) to find it.
3. Log in and change the credentials: Open a web browser, type in the camera’s IP address (e.g. http://192.168.1.108), and log in using the factory credentials. The first thing you should do is change the admin password to something strong and unique.
4. Set a fixed IP address: To keep the camera’s IP consistent (so it doesn’t change every time your router restarts), assign it a static IP. You can do this in the camera settings by turning off DHCP and entering an address manually, such as 192.168.1.50.
5. Adjust network settings: You can then configure key details such as port forwarding for remote viewing, motion alerts, and recording preferences in the web interface.

For a wireless setup using the app:

1. Power up and get ready: Switch on your camera and locate the QR code—this is usually printed on the bottom of the device or on a sticker.
2. Pair the camera in the companion app: Download and open the manufacturer’s app, tap Add Device, and select your camera model. When prompted, scan the QR code on your camera with your phone. Some models may also require you to press a physical setup button. Wait for the confirmation sound or LED light that signals the camera has been paired.
3. Connect the camera to your Wi-Fi: The app will display available networks—select your home Wi-Fi and enter your password. Give the camera a few seconds to connect. When it’s ready, the app will confirm the connection.
4. Finalise the setup: Follow the app’s on-screen instructions to name your camera and adjust any basic settings like motion detection, notification preferences, and storage options.

How to Protect Your Security Camera’s IP Address

Once your camera is set up and running, you’ll want to keep it safe. Exposing an IP camera to the wider internet without safeguards is like leaving your front door unlocked. Here are the key steps to make sure your camera and its IP address stay private.

Change all default logins

The first and simplest defence: replace every default password—your camera, your router, and any connected apps—with long, unique passphrases. Even strong passwords can be compromised over time, so consider updating them regularly.

Keep your software up to date

Firmware updates often include critical security patches. Check for updates on both your camera and router every few months and apply them promptly. Many cameras allow automatic updates—enable this if possible.

Lock down remote access

Disable UPnP and WPS on your router to stop it automatically opening ports. If you do need remote viewing, avoid exposing the camera’s IP directly. Instead:

• Set up a VPN for secure access, or
• Forward only the essential ports and monitor them carefully.

Isolate cameras from the rest of your network

Run your cameras on a separate VLAN or guest Wi-Fi network so they can’t directly communicate with your laptop, phone, or other sensitive devices. This creates a barrier even if a camera is ever compromised.

In the camera’s settings, enable HTTPS or encrypted streaming (RTSP over TLS) to keep your login details and video feed safe from interception.

Conclusion

Now you know how to find camera IP address and get it set up on your network. Whether you used the app route, your router’s device list, or a network scanner, the process is actually pretty straightforward. But don’t stop there. Assign a fixed IP, change the default credentials, and check for firmware updates to keep things running safely. These small steps make a huge difference in locking down your camera from unwanted access.

FAQs

What is the IP address for CCTV?

An IP address for CCTV refers to a unique identifier assigned to a network-connected camera, allowing it to transmit video data over a local network or the internet. This address enables remote access and management of the camera, facilitating surveillance and monitoring from various devices. Each IP camera has its own IP address, distinguishing it from other devices on the network.

How do I find the IP address of a device?

To find the IP address of a device, you can use the manufacturer’s dedicated apps/web interfaces, check your router’s connected device list, utilize network scanning tools like Fing or Angry IP Scanner, check the device’s labels and manuals, or employ command-line utilities like arp or nmap.

Do cameras have their own IP address?

Yes, modern IP cameras have their own unique IP addresses. This allows them to connect to a network, transmit video data, and be accessed remotely. Unlike traditional analogue cameras, IP cameras use digital protocols, making the IP address essential for remote viewing, motion detection alerts, and integration with smart home systems.

Related Blogs

Check out more articles about CCTV cameras

• NVR and IP Camera Setup: Simple Steps
• How to Connect Wireless Camera to NVR: Step-by-Step Setup
• How to install CCTV cameras