eufy Robot Lawn Mower E15
Awards and Media Picks




Overview

Hands-Free Auto Mapping

No Wires, No Complex Setup, Just Total Automation

Precise Obstacle Avoidance

Reliable Lawn Maintenance

Secure and Convenient Lawn Care











25-75 mm (1-3 in)







Specs
| Features | |
| Max Mapping Size | 0.2 acres (8,700 sq ft) |
| Cutting Height | 1 - 3 in (25 - 75 mm) |
| Cutting Width | 8 in (203 mm) |
| Maximum Slope | 18° |
FAQ
1. How do I know if the eufy Robot Lawn Mower is suitable for my yard?
-
Lawn Size: Less than the max mapping size 0.2 ac(8,700 sq ft).
-
Slope Check: Less than 40% (18 degrees)
-
Grass Type: No dense Zoysia or St. Augustine grass, and the grass height is below 9 cm(3.5 in).
-
Terrain: Mostly flat with variations under 3 cm(1.2 in).
1. How to prepare my lawn?
-
Mowing Hours: From half an hour after sunrise to half an hour before sunset.
-
Grass Height: Keep grass under 9 cm (3.5 in).
-
Types of Grass: We don't recommend using this product to cut Zoysia or St. Augustine grass.
-
Slope Check: Ensure slopes are ≤18 degrees; set No-Go Zones for steeper areas.
-
Clear Obstacles: Remove stones and debris, and fill in any holes or uneven ground.
-
Wi-Fi Setup: Use a mobile hotspot for initial setup if Wi-Fi coverage is limited. After setup, enable 4G to ensure stable connectivity.
-
Set No-Go Zones: Mark areas where the mower could get stuck, like pipes or sprinkler heads, and areas not fully covered with grass. Allow low stepping stones.
2. How to use the base station?
-
Placement: Ensure a straight path of at least 5 m in front of the base station.
-
Map Limit: Each base station supports one map. For more maps, contact eufy support to order additional base stations.
-
Installation: Secure the base station using nails for lawns or glue for hard surfaces.
-
Return Mower to Base: Press "Return" and then "OK".
3. How long does it take to start using the lawn mower?
-
Initial configuration is completed in approximately 5 minutes. The mapping process typically requires 3–4 hours for a standard 0.2 ac (8,712 sq ft) area. Large, complex areas will take longer.
1. How can I achieve better edge cutting results?
-
Safe Distance: Avoid edges with obstacles, ditches, or cliffs.
-
Optimize Edge Cutting: Adjust Danger Zone Detection settings for closer cutting. This may increase mower hazards.
-
Trimming Near Walls: Grass within 10 cm (4 in) of walls may require manual trimming.
-
Boundary Grass: Trim grass taller than 9 cm (3.5 in) before mowing.
2. How to optimize mowing performance?
-
Grass-Cutting Zone: For full coverage, manually set the grass-cutting zone, especially for yellowed or patchy lawns or manhole covers.
-
Cutting Height: Gradually lower blade height for tall grass.
-
Multi-Zone Pathway: Set up a Multi-Zone Pathway if the distance between lawns is ≤60 m.
-
No-Go Zones: Mark areas where the mower could get stuck.
-
Boundary Setup: For unclear divisions with neighbors, use physical barriers or set virtual walls after mapping.
3. What is the maximum mowing area per battery charge?
4. Does the mower automatically resume mowing after recharging?
5. How to maintain it to achieve good usage results?
-
Base Station Placement: Keep the charging cable 30 cm (12 in) above ground to prevent water damage.
-
Software Updates: Regularly update firmware. Update to the latest app and V6 firmware to use the new map splitting and zone management features?
1. Safety Tips




