eufy Permanent Outdoor Lights S4 (100ft with 72 LED Lights)

The light strip can be installed on flat surfaces including glass, cement, wood, or metal. Ensure the surface is clean and dry; paint may reduce adhesion. For longer use, secure with screws. For cement walls, contact eufy support for anchors.

Add them in the eufy app before installing(Please make sure your app is updated to at least version 5.1.0. If you accidentally skip the binding process for the radar, you can continue binding on the motion setting page); keep close to the controller while pairing. Poor network or Wi‑Fi 7 may affect pairing. Adjust the sensitivity and angle (30°–45°) to avoid triggering issues. Check the radar LED flash to confirm detection.

Due to power and signal attenuation, S4 supports up to 200  ft / 60 m (144 LEDs) only. Y‑shaped connection is not supported.

Ensure correct installation, and power off or manually calibrate when adding strips. For dimming issues, keep length under 150 ft. For flickering, check that extension cables are under10 m / 30  ft, connections are tight, and there's no LED damage.

The radar can only trigger eufy Permanent Outdoor Lights S4. With Matter, you can use third‑party devices to turn lights on/off, and control brightness, color, or temperature. Apple Home supports away/home lighting and linking with some eufy locks.